We are Manufacturer, Supplier, Exporter of Moisture Separators, Industrial Moisture Separators, Steam Separators, Air Moisture Separators, Steam Moisture Separators, Air Compressor Water Separators, Baffle Type, Centrifugal Type, Centrifugal Cum Demister Pad Type Moisture Separators and our set up is situated in Pune, Maharashtra, India.
The moisture in compressed air enters into separator tangentially and further it travels to pass through baffles which will results in spinning of air around inner separator pipe. The water droplets are impinged on separator wall by this centrifugal action.
Thus, separates water droplets from air. Here speed of air reaches maximum at the bottom of separator. Then air enters inner pipe resulting in change of direction, further separation of droplets occurs. Then air will pass through demister pad, here moisture will be separated in wire mesh and small droplets will be separated and collected at the bottom of separator.
It is designed on impingement principle & basic function is to separate bulk quantity of bigger oil & moisture droplets from compressed air. The separated oil & moisture gets collected in sump & further drained out effectively by providing suitable drain at bottom.
High temperature/high pressure range is available
Robust & compact design
Indigenously manufactured
Maximum working life
Low maintenance cost
Range :
1/2" to 12" line size at operating pressure of 16 Kg/cm2.
MOC :
Housing – As per IS 1239.
Baffle / Fins – IS 2062
Demister – SS 304 / SS 316
Location :
After – After Cooler in between pipe line. Outlet of Compressor at coolest place on pipe line.
Types:
Note : Higher Pressure / Range can be offered on Request.